Threading Machine

Machine Working Feature

1. Pipe clamps will be provide to hold the pipe during operation.
2. End Stopper will be provided to adjust the desired  thread length.  Once the stopper is adjusted, the machine will thread all the pieces accurately. Then lead screw drive the entire pipe fitted in clamp for threading.
3. Threading length will be  set by human machine interface (HMI) with PLC Touch Screen Control Panels which to suit length. .
4. Threading head will open automatically after completion of threading
5. After automatically opening the Box nut,  it will move back the clamping vise for reversing the pipe and will automatically open the vise for manual unload pipe 

Machine Working Feature

1. Pipe clamps will be provide to hold the  Pipe,bolt,Rod,Rebar,Round Bar,Sag Rod,Anchor Bolt during operation.
2. End Stopper will be provided to adjust the desired  thread length.  Once the stopper is adjusted, the machine will thread all the pieces accurately. Then the lead screw drives the entire pipe fitted in clamp for threading.
3. Threading length will be  set by human machine interface (HMI) with PLC Touch Screen Control Panels which to suit length. .
4. Threading head will open automatically after completion of threading
5. After automatically opening the Box nut,  it will move back the clamping vise for reversing the pipe and will automatically open the vise for manual unload  Pipe,bolt,Rod,Rebar,Round Bar,Sag Rod,Anchor Bolt   

National Cutting Tools has emerged as a dependent entity to look for technically upgraded Bar Threading Machine in India. HSS Tangential Chasers are used as cutters. Bar remains stationery and Die Head rotates. BSP, BSPT, NPT, UNF, UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following:-

We are a renowned Manufacturer, Supplier, and Exporter of Hydraulic Pipe Threading Machine, operating from Ludhiana, Punjab. Hydraulic Pipe Threading Machine is designed for efficient and fast production of thread onto pipes and fittings. Hydraulic Pipe Threading Machine is useful for minimizing Exterior Line on Pipe joints by Pursuing Method. HSS Tangential Chasers are used as blades. Matric, BSP, BSPT, NPT, UNF, UNC, BSW, Acme Discussions B.S.F etc. threads can be done onto pipes. Hydraulic Pipe Threading Machine is fitted with sturdy gears that are made of case hardened steel with extra-large face with, tooth thickness, and cut on hobbing machine for noiseless operation even at high speed.

Design & Workmanship : Hydraulic Pipe Threading Machine is designed to produce precise threads within the tolerance for which they were intended.

Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, and fitted with three extra heavy-duty bearings.

The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome-plating unit.

The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment.

The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. All the gears are made of best quality steel.

Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy-duty box type vice. The jaws are heat-treated. The movements of jaws are controlled by a screw on the saddle.

Range of NCT Threading Machines and Die Heads

• 1/2" to 2.1/2" do/-
• 1" to 4" Capacity Pipe
• 2.1/2" to 6" Capacity Pipe
• 4" to 8" 4" to 8" Capacity Pipe

We are Manufacturer, Exporter and Supplier of genuine quality Rod Threading Machine, which is highly admired by all our clients in the quality cautious market. These machines are highly preferred by the clients as they are easy to use. We are one of the preeminent threading machine manufacturers in India. These machines encompass advanced features that assist us in producing high quality threads at a fast pace. There is a heavy duty geared head box provided for qualitative support to the spindle bearings. Tie rod threading machine manufactured by us offers high resistance to abrasion and heat. The delivery of these threading machines is made well within the stipulated time period.

The Rod Threading Machine is used for Cutting External Thread on Rod by Chasing method. HSS Tangential Chasers are used as cutters. Rod remains stationery and Die Head rotates. BSP, MATRIX, BSPT, NPT, UNF,UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following:-

• Base
• Head Stock
• Saddle
• Pillar Type Or Bed Type Clamping Vice
• Die Head

The Rod Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally the are built with high standards of workmanship, material and quality so closely associated with Company Tradition.

Design & Workmanship : The National Cutting Tools Rod threading machines are designed to produce quality threads within the to lerance for which they were intended.

Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, fitted with three extra heavy duty bearings.

The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit.

The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment.

The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel.

Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle.

Range of NCT Threading machines and Die Heads.

• 3/8'' to 1.12'' do/-
• 1/2'' to 2.1/2" do/-

Based on advanced technology, Rebar Threading Machine is a revolutionary machine for threading forged ends of reinforcement bars. Rebar Threading Machine is designed for the precise production of Rebar, reinforcing bar, for concrete foundations. With futuristic design, Rebar Threading Machine significantly reduces effort, thus boosts productivity to a great extent. Rebar Threading Machine offers several other benefits such as low operating cost, easy installation & maintenance, non-corrosive housing and fast operation that make it worth buying. We are a Manufacturer, Exporter, and Supplier of Rebar Threading Machine, based in Ludhiana, Punjab. For further technical information, please contact us.

We manufacture, export and supply excellent quality Bolt Threading Machine that is predominantly used to produce superior quality threads. Our Bolt Threading Machine is highly valued for its flawless performance, durability, sturdy construction and high accuracy. Bolt Threading Machine, offered by us, is used for cutting external thread on bolts by chasing method. HSS Tangential Chasers are used as cutters. Bolt remains stationery and die head rotates. BSP, MATRIX, BSPT, NPT, UNF, UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. Our Bolt Threading Machine mainly consists of base, head stock, saddle, pillar or bed type clamping vice and die head.

Design & Workmanship : The National Cutting Tools Pipe & Bolt Threading Machines are designed to produce quality threads within the tolerance for which they were intended.

Head Stock : A heavy duty geared head box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated and fitted with three extra heavy duty bearings.

Range of NCT Bolt Threading machines and Die Heads :

• 3/8'' to 1.12'' do/-
• 1/2'' to 2 .1/2" do/-

National Cutting Tools has emerged as a dependent entity to look for technically upgraded Bar Threading Machine in India. HSS Tangential Chasers are used as cutters. Bar remains stationery and Die Head rotates. BSP, BSPT, NPT, UNF, UNC, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The machine mainly consists the following:-

Design : The National Cutting Tool Bar threading machines are designed to produce quality threads within the tolerance for which they were intended.

Head Stock : A heavy duty geared Head Box is of best quality casting providing support to the spindle bearings. The box is of gear type, lubricated, and fitted with three extra heavy duty bearings.

The Bed : The bed is pillar type having two pillars made of best quality steel nicely finished & duly hard chrome plated in the most modern hard chrome plating unit.

The Saddle : The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the Head Stock alignment.

The Apron : The apron gives movement to the saddle with head transfer along with pillars through steel rack and pinion arrangements. It's all gears are made of best quality steel.

Vice Jaws : The vice jaws made from the best quality alloy steel are fitted on the saddle well aligned with the head stock center fitted in a heavy duty box type vice. The jaws are heat treated. The movements of jaws are controlled by a screw on the saddle.

Range

• 3/8'' to 1.12'' do/-
• 1/2'' to 2 .1/2" do/-