-
+91-9888210800, +91-9417001342 -
nationalcuttingtools@gmail.com
Pillar Type Power Press
|
Rolling Key : Is fitted in the two parts of EN-34 alloy steel duty tempered and property ground and give a perfect service. All are being taken that the key may not break and is suitable to stand the jerks.
Alignment : Heighest degree of precision maintained during the fitting of ram and it's base is checked very property on 90 angel with the dail indicator. Horizontally & Perpendicularly.
Body : The press bodies are manufactured out of the close grain casting and steel fabricated as well.
Specifications
| Capacity in Tones | 10 Ton | 20 Ton | 30 Ton | 50 Ton | 75 Ton | 100 Ton | 150 Ton | 200 Ton | 250 Ton | 300 Ton |
| Bed Size | 12" x 14" | 14" x 16" | 16" x 18" | 18" x 20" | 20" x 22" | 22" x 24" | 24" x 26" | 28" x 30" | 32" x 32" | 34" x 34" |
| Bed to Ram | 9" | 10" | 11" | 12" | 14" | 16" | 18" | 20" | 22" | 24" |
| Bed Bore | 4" | 4½" | 5" | 6" | 7" | 8" | 9" | 10" | 11" | 12" |
| Gear Dia | 18" | 22" | 24" | 26" | 30" | 34" | 38" | 42" | 48" | 54" |
| Fly Wheel Dia | 21" | 25" | 28" | 32" | 36" | 39" | 42" | 48" | 52" | 58" |
| Crank Shaft Dia | 3" | 3½" | 4" | 4¾" | 5½" | 6½" | 7½" | 8¼" | 9" | 10" |
| Back Shaft Dia | 2¼" | 2½" | 2¾" | 3½" | 3½" | 4" | 4 3/4 | 5" | 5½" | 6" |
| Stroke | 2¼" | 2½" | 3" | 3½" | 4" | 4½" | 5" | 5½" | 6" | 6½" |
| Hole in Ram for Die Clamping | 1" | 1¼" | 1¼" | 1½" | 1 3/4 | 2" | 2" | 2¼" | 2½" | 2½" |
| No. of Stokes | 76" | 66" | 58" | 60" | 56" | 53" | 50" | 46" | 40" | 38" |
| Pully Size | 5" | 6" | 7" | 7" | 7" | 7" | 7" | 7" | 7" | 8" |
| Total Height | 65" | 72" | 78" | 85" | 93" | 98" | 109" | 117" | 128" | 104" |
| Motor Required | 1 H.P. | 2 H.P. | 3 H.P. | 5 H.P. | 5 H.P. | 7½ H.P. | 10 H.P. | 15 H.P. | 20 H.P. | 30 H.P. |